Intex 8 x 30 Easy Set Pool with Optional Easy Set Swimming Pool Pump and Accessories

23 inches

First make sure the air valves are firmly secure and inserted, and then use the back of your hand to feel if there is any leakage on the top ring, if no leakage is located, you can also put liquid soap in a squirt bottle and spray on seams. If there is a leak it will bubble. After the leakage is located, repair it with the repair kit included in the pool set.

Yes. Small tears or holes can be repaired with the enclosed repair kit. The surface should be clean and dry before affixing the patch.

To the line near the bottom of the inflated ring. Do Not Overfill above the line as this may cause the pool walls to become unstable and possibly result in injury or property damage from the water flowing over the pool wall while in use.

Do not over inflate or use high-pressure air compressors. Inflate top ring to be slightly firm to the touch. Pay attention to air temperature variation! In cold weather the top ring will lose some pressure, air will contract. If this occurs, DO NOT add air since the air inside will expand again once the temperature RISES. In hot weather, the air will expand. You MUST let some air out to prevent the top ring from failing due to excess internal pressure. An over-inflated ring heated by the sun may burst or lead to leaks in the seam.

The base or bottom of the pool is not laid out properly (flat without wrinkles). The pool liner must extend evenly around the outside of the inflatable ring when filling the pool with water. If this is the case, and the pool is still lopsided, then the ground is not 100% level.