Metal Frame Pool
What should I do if the sleeve is stuck onto the horizontal beams?
Before removing the horizontal beams from the pool liner, please make sure the pool is completely empty, and the vertical legs or U-shape side supports have been disassembled and removed from the beams. During the removal of the legs and U-shape side supports, shake the vertical legs or U-shape side supports from the horizontal beams. This will reduce the tightness between sleeve and beams, therefore the horizontal beams can slide out easier. 1. Pull the sleeve from the holes on the sleeve, and try separating it from the beam. Repeat this along the sleeve. Don't use water or soap as it will cause a suction effect between the sleeve and the beam. 2. Grasp the beam edge and rotate the beam left and right (back and forth) while pulling the beam out. The left and right rotation will help facilitate the removal of the horizontal beam. Next season, before setting up the pool, please spread some baby powder (do not use corn powder) over the horizontal beam during assembly which will make it easy to disassemble when you restore the pool. How to remove horizontal beams from the liner sleeve?
How much does it cost to fill the pool with water?
What AGP sizes of Rectangular Frame & Ultra Frame Pools are available? What are the measurements, the water capacity and water depth?
Does a patch for liner repair come included with the pool set?
Do you recommend using chemicals? If so, what kind?
Yes. Contact your local pool supply store for information on water treatment and provide the estimated number of gallons of water in your pool. Also the INTEX Krystal Clear? Saltwater Systems will keep your pool clean from algae and bacteria.
Why does the pool frame lean inward after assembled?
What is the pool liner made of?
What AGP sizes of Metal Frame / Ultra Frame pools are available? What are the measures, water capacity and water depth?
Can I set the pool up on a concrete patio?
Yes, as long as the pool location allows you to secure all doors and windows. A ground cloth placed under the pool is highly recommended. Do not drag liner across concrete as abrasions may cause holes. Surface must be flat, level and stable.
Can sand be used to level the ground at the pool site?
What is needed to prepare a site for the pool?
Can the pool be left up year-round?
How often should the water be changed?
Should I leave my pool outside in snow or freezing winter?
Is it safe for my pets to play in the pool?
How do I prevent the pool from damaging grass or fungi from developing on concrete?
Can a portable water heater be used for this type of pool?
Does the liner require any special care to ensure durability?
What should I use to clean my pool before storing it for the winter?
What is the correct way to install the restrainer strap for the U-shaped side support?
Are extra lock pins included in case I lose some?
How high can I fill the pool?
Without measuring, how do I know what is my frame pool size?
Can a pool be set up on a slope?
Is a fence or enclosure required by law?
Would excessive pool chemicals affect / cause deterioration to liners?
How long does it take to fill the pool with water?
Is it safe to jump or dive into the pool off of a ladder or any type of platform?
Do I need to keep safety and rescue equipment on hand near my pool?
Why do I have algae in my pool even when I run my filter pump regularly?
How do I prevent dirt and grime from getting into the pool water?
How do I insert the metal poles into the pool liner?
In what sequence should the pool be put together?
How come the pool starts to tilt to one side even when I have already set it up on level ground?
What is the most important step I need to be aware of before filling up the pool?
What are the advantages of an Ultra Frame Pool?
How do I drain the pool?
1. Remove the cap from the drain valve on the outside of the pool wall. 2. Attach the female end of the hose to the hose adapter. 3. Place the end of the hose in an area where the water can be safely drained. 4. Screw the hose adapter to the drain valve. Note: water will start to drain immediately. 5. Disconnect hose adapter when finished. 6. Replace drain plug on the inside of pool for storage. 7. Replace drain cap on outside of pool. 8. Be sure pool liner is completely clean and dry before long-term storage.
Does the ladder, ground cloth and/or cover come with the pool?
How do you fit the last joint into its designated horizontal beam while keeping the other beams intact on the round frame pool?
How does UV affect the materials used?
Why does the rope seam tear sometimes? What causes tears in the pool liner?
What's advantage of Rectangular Ultra Frame Pool?